360 Shove-it
also known as: Old-School 360 Shove-it · Backside 360 Shove-it · No-Pop 360 Shove-it
Shown for a regular-footed rider. Teal ring + arrow = the rider's facing direction; teal band = the tail; a dot is where a hand holds the board - bright yellow for the front hand, amber for the back one, which is the whole difference between a mute and an indy. Board and rider rotate independently - each follows its own component. Unlock the camera (top right) to drag the view around.
How it works
The old-school shove-it taken all the way round: with no pop, the back foot sweeps the tail toward the heels and keeps sweeping, so the board spins a full 360 degrees backside flat beneath a rider who does not turn, and it lands with the nose leading again. Without a snap to lift it, the board stays low and the whole revolution has to come from the length of the sweep, which is why it is harder than it looks next to the 180: the foot has to stay on the tail far longer, and the hop has to be timed so the board is unweighted but not left behind.
Step by step
- Roll slowly with the back foot flat across the tail and the front foot near the middle.
- Hop just enough to unweight the board - no pop, the deck stays level.
- Sweep the tail toward your heels in a long, round stroke and keep the foot on it through the first half of the turn.
- Lift both feet and let the board carry on round beneath you, shoulders square.
- Watch the nose come all the way back to the front and stop the spin with both feet over the bolts.
- Settle and roll away the way you came.
Body mechanics
| Front foot | Lifts off first and hovers over the middle of the deck, out of the way until the catch. |
|---|---|
| Back foot | Does the whole trick: a long, flat, rounded sweep heel-ward that feeds in a full revolution. |
| Shoulders | Square the whole way - the board turns, the rider does not. |
| Arms | Low and quiet; a swing of the arms would turn the body with the board. |
| Gaze | On the grip, counting the turn round to time the catch. |
Discussion
Sign in to join the discussion.
No comments yet.