invert vert difficulty 8/10

Sign in to add this trick to your list.

roll 0° yaw 0° pitch 0° body 0°

Shown for a regular-footed rider. Teal ring + arrow = the rider's facing direction; teal band = the tail; a dot is where a hand holds the board - bright yellow for the front hand, amber for the back one, which is the whole difference between a mute and an indy. Board and rider rotate independently - each follows its own component. Unlock the camera (top right) to drag the view around.

How it works

A frontside invert stalled out at the top, then finished by swinging the tail around and setting the board down backwards. It ends where a Miller flip ends and gets there by a different route: the Miller flip is one sweep straight over backwards, while the mambo stops in the invert first and the second half arrives as a separate swing. Grosso puts it plainly: a twisting stalled Miller flip, except there is no flip really.

Step by step

  1. Ride up frontside and plant the rear hand on the coping, taking mute with the front hand, as for a regular invert.
  2. Go up into the invert and stall it there, board held overhead.
  3. From the stall, swing the tail around over the coping, twisting the board and the legs through the second half-turn.
  4. Bring the board back down onto the wall backwards as the swing finishes.
  5. Release the plant and ride back in fakie.

Body mechanics

Front footHeld to the grip by the mute grab through the stall, then guides the swing.
Back footThrows the tail around for the second half - the swing comes from the back leg.
ShouldersStay put over the plant; the turn happens below them rather than through them.
ArmsThe rear arm is the plant and holds the whole stall; the front hand's grab steers the board round it.
GazeDown the wall through the stall, then over the shoulder to spot the backwards set-down.

Delete this comment?

Discussion

Sign in to join the discussion.

No comments yet.

Something wrong with the Jolly Mambo?

No account needed. Say what's wrong and, if you can, what it should be - a source helps a lot. If you know exactly what the fix is, proposing the edit directly gets it in faster.

What kind of problem?