also known as: Sad Plant

invert parkvert difficulty 7/10

Sign in to add this trick to your list.

roll 0° yaw 0° pitch 0° body 0°

Shown for a regular-footed rider. Teal ring + arrow = the rider's facing direction; teal band = the tail; a dot is where a hand holds the board - bright yellow for the front hand, amber for the back one, which is the whole difference between a mute and an indy. Board and rider rotate independently - each follows its own component. Unlock the camera (top right) to drag the view around.

How it works

An invert with the front leg boned straight at full inversion - the 'sad' in the name being period slang for the drooping, maximum-tweak extension. Structurally identical to the classic handplant, but at the top of the handstand the front knee punches out, pushing the board away from the body while the grab keeps hold of it. The extension moves the board's mass off the balance axis, so the planted arm has to fight a lever it doesn't fight in a normal invert.

Step by step

  1. Ride up frontside and plant the trailing hand on the coping, grabbing with the front hand.
  2. Swing into the one-armed handstand as for a standard invert.
  3. At full inversion, bone the front leg straight, pushing the board's nose away from your body.
  4. Hold the tweaked stall - arm locked, leg extended, board levered out overhead.
  5. Retract the leg, swing back down the wall, release the plant, and re-enter.

Body mechanics

Front footPunches out with the boned knee, carrying the board away from the balance axis.
Back footStays folded, holding the tail against the grab as the counter-tension.
ShouldersThe planted shoulder absorbs the extra torque the extended lever creates.
ArmsPlanting arm locks harder than in a plain invert; grabbing arm resists the boned leg's push.
GazeDown through the plant at the ramp, monitoring the stall's drift while the leg extends.

Delete this comment?

Discussion

Sign in to join the discussion.

No comments yet.

Something wrong with the Sadplant?

No account needed. Say what's wrong and, if you can, what it should be - a source helps a lot. If you know exactly what the fix is, proposing the edit directly gets it in faster.

What kind of problem?