also known as: Pivot Fakie

lip parkvert difficulty 3/10

Sign in to add this trick to your list.

roll 0° yaw 0° pitch 0° body 0°

Shown for a regular-footed rider. Teal ring + arrow = the rider's facing direction; teal band = the tail; a dot is where a hand holds the board - bright yellow for the front hand, amber for the back one, which is the whole difference between a mute and an indy. Board and rider rotate independently - each follows its own component. Unlock the camera (top right) to drag the view around.

How it works

A 5-0 stall on the coping that goes back the way it came: the board turns backside 90 degrees up onto the back truck, holds on the single axle with the nose floating out over the deck, then turns frontside 90 back to where it started and drops in fakie. Nothing is carried round - the pivot out and the pivot back cancel - which is what makes it a pivot to fakie rather than a pivot stall.

Step by step

  1. Ride up at a slight backside angle, slower than for an axle stall.
  2. As the rear truck meets the coping, turn 90 degrees backside onto it and let it lock on the lip.
  3. Keep the nose floating level or slightly raised - do not set the front truck down.
  4. Hold the single-axle balance for a moment with your weight stacked over the rear wheels.
  5. Turn the nose back frontside 90 the way it came, and drop in fakie.

Body mechanics

Front footOver the front bolts, holding the nose up with constant light tension.
Back footOn the tail pocket, weight stacked directly over the rear axle on the coping.
ShouldersQuarter-turned to match the coping in the stall; their unwind steers the exit.
ArmsSpread for balance - corrections on one axle come from arms and ankles, not big weight shifts.
GazeAt the coping lock going in, then down the transition an instant before the exit swing.

Delete this comment?

Discussion

Sign in to join the discussion.

No comments yet.

Something wrong with the Pivot to Fakie?

No account needed. Say what's wrong and, if you can, what it should be - a source helps a lot. If you know exactly what the fix is, proposing the edit directly gets it in faster.

What kind of problem?