Backside Noseblunt Slide

also known as: Back Noseblunt · BS Nosebluntslide

slide streetparkvert difficulty 8/10

Sign in to add this trick to your list.

roll yaw pitch body
surface obstacle

Shown for a regular-footed rider. Teal ring + arrow = the rider's facing direction; teal band = the tail; a dot is where a hand holds the board - bright yellow for the front hand, amber for the back one, which is the whole difference between a mute and an indy. Board and rider rotate independently - each follows its own component. Drag to orbit.

How it works

The bluntslide's front-truck mirror: the front wheels ride on top of the obstacle with the nose wedged against the edge below them, deck pitched steeply tail-high, entered by rotating a backside quarter-turn while driving the body up and over the front axle. The rider is effectively doing a nollie-loaded handstand of a trick - weight fully forward over a wedge they entered blind-side-back - which is why back nosebluntslides down handrails remain a benchmark of technical rail skating. The release is a nollie snap off the wedged nose that levels the board for the drop to flat.

Step by step

  1. Approach with the obstacle on your heel side at speed, square stance.
  2. Ollie above the edge and quarter-turn backside while shifting hard over the nose.
  3. Land the front wheels on top with the nose jammed against the edge below, tail towering behind.
  4. Stack chest and hips directly over the front axle; the back foot rides the steep deck lightly.
  5. Slide the wheels-and-nose wedge, holding constant forward pressure.
  6. Snap a nollie off the nose to release, level out over the landing side, and roll away.

Body mechanics

Front footCarries nearly everything - presses the nose wedge into the edge and pops the nollie exit.
Back footRides high on the pitched deck, steadying the tail's skyward angle.
ShouldersQuarter-turned with the board, chest committed out over the front truck.
ArmsBoth forward-and-wide, framing the balance over the nose.
GazeJust past the front wheels at the top surface, flicking to the end for the release.