lip vertpark difficulty 5/10

Sign in to add this trick to your list.

roll 0° yaw 0° pitch 0° body 0°

Shown for a regular-footed rider. Teal ring + arrow = the rider's facing direction; teal band = the tail; a dot is where a hand holds the board - bright yellow for the front hand, amber for the back one, which is the whole difference between a mute and an indy. Board and rider rotate independently - each follows its own component. Unlock the camera (top right) to drag the view around.

How it works

A pivot stall on the tail, held by the nose: riding up the transition, the rider sets the tail on the coping with the board stood up almost straight and grabs the nose with the front hand, then pivots a backside 180 on the tail where it sits on the lip - side on to the ramp half way round - and rides back in nose first. It is the same turn as a pivot on the back truck, done on the tail instead, the grab holding the board up on end while it goes round.

Step by step

  1. Ride up the transition forward.
  2. At the top, set the tail on the coping and grab the nose with the front hand, the board stood up steep.
  3. Pivot backside on the tail, holding the nose - half way round the board is side on to the ramp.
  4. Keep turning until it points back down into the ramp.
  5. Let go and ride back in nose first.

Body mechanics

Front footOff the front of the board or light on it while the hand holds the nose up.
Back footOn the tail, pressing it onto the coping.
ShouldersLead the backside pivot over the coping.
ArmsFront hand holding the nose up; back arm out.
GazeDown at the coping, then into the ramp.

Delete this comment?

Discussion

Sign in to join the discussion.

No comments yet.

Something wrong with the Tailblock?

No account needed. Say what's wrong and, if you can, what it should be - a source helps a lot. If you know exactly what the fix is, proposing the edit directly gets it in faster.

What kind of problem?