also known as: 540 Kickflip · 540 Shove-it Kickflip

flip flatgroundstreet difficulty 8/10

Sign in to add this trick to your list.

roll 0° yaw 0° pitch 0° body 0°

Shown for a regular-footed rider. Teal ring + arrow = the rider's facing direction; teal band = the tail; a dot is where a hand holds the board - bright yellow for the front hand, amber for the back one, which is the whole difference between a mute and an indy. Board and rider rotate independently - each follows its own component. Unlock the camera (top right) to drag the view around.

How it works

The 360 flip taken half a turn further: one kickflip rolled into a backside 540 shove-it, the board spinning a turn and a half under the rider while it flips once. The scoop has to be deeper and harder than a tre's to get the extra half turn, and the pop higher to give it time, so the flick is light and late in comparison - the spin, not the roll, is what runs out of air first. The rider does not turn; the board comes round to its original heading nose first at the end.

Step by step

  1. Set up as for a 360 flip, back foot deep in the pocket of the tail, front foot angled behind the bolts.
  2. Pop hard while scooping the tail backside with more force than for a 360 flip.
  3. Flick lightly off the nose so the board rolls once while it spins.
  4. Jump higher than usual and stay square - the board does the turning, not you.
  5. Wait for a turn and a half of spin and one roll, catch with the back foot first, and land over the bolts.

Body mechanics

Front footA light flick off the nose; most of its job is getting out of the way.
Back footScoops the tail backside hard and deep - the whole turn and a half comes from it.
ShouldersSquare and still, so the board spins under a rider who does not.
ArmsLevel, balancing against the pull of the scoop.
GazeDown on the board through the spin, spotting the grip to catch.

Delete this comment?

Discussion

Sign in to join the discussion.

No comments yet.

Something wrong with the 540 Flip?

No account needed. Say what's wrong and, if you can, what it should be - a source helps a lot. If you know exactly what the fix is, proposing the edit directly gets it in faster.

What kind of problem?