Backside Disaster

also known as: Disaster

lip parkvert difficulty 4/10

Sign in to add this trick to your list.

roll 0° yaw 0° pitch 0° body 0°

Shown for a regular-footed rider. Teal ring + arrow = the rider's facing direction; teal band = the tail; a dot is where a hand holds the board - bright yellow for the front hand, amber for the back one, which is the whole difference between a mute and an indy. Board and rider rotate independently - each follows its own component. Unlock the camera (top right) to drag the view around.

How it works

An aerial 180 that lands in the rocked position: the rider pops off the lip, rotates backside 180 in the air, and slaps the middle of the deck down across the coping before pulling back into the ramp fakie-rock style. The name comes from how the landing looks - deck jack-knifed over the lip, one truck in, one truck out.

Step by step

  1. Approach the coping with a bit more speed than a rock to fakie needs.
  2. As the front truck passes the lip, pop or float a backside 180, keeping the board sucked up under you.
  3. Rotate head and shoulders 180 so you land facing back into the ramp with the deck-middle slapping onto the coping.
  4. Balance the rocked position for a beat, wheels straddling the lip.
  5. Shift weight to the down-ramp foot, lift the outside truck clear of the coping, and drop back in.

Body mechanics

Front footGuides the 180 in the air and then presses the deck flat onto the coping on touchdown.
Back footOn the tail for the pop, then anchors the in-ramp side of the see-saw during the stall.
ShouldersInitiate and complete the backside 180 before the deck lands - under-rotating leaves a truck hooked on the lip.
ArmsWind and release with the rotation, then spread for balance in the rocked position.
GazeTurn the head with the spin and spot the coping so the deck lands centered across it.

Delete this comment?

Discussion

Sign in to join the discussion.

No comments yet.

Something wrong with the Backside Disaster?

No account needed. Say what's wrong and, if you can, what it should be - a source helps a lot. If you know exactly what the fix is, proposing the edit directly gets it in faster.

What kind of problem?