also known as: Boneless One

footplant flatgroundstreet difficulty 2/10

Sign in to add this trick to your list.

roll 0° yaw 0° pitch 0° body 0°

Shown for a regular-footed rider. Teal ring + arrow = the rider's facing direction; teal band = the tail; a dot is where a hand holds the board - bright yellow for the front hand, amber for the back one, which is the whole difference between a mute and an indy. Board and rider rotate independently - each follows its own component. Unlock the camera (top right) to drag the view around.

How it works

A grabbed footplant from the early 1980s: the front hand takes the outer, heel-side edge near the nose, the front foot steps off and plants on the ground, and the hand brings the board up by the nose beside the raised knee, barely rolling it, before putting it back under the feet on its wheels to ride away. Height comes from the leg plant rather than any tail pop, and with more spring it is launched as a jump off that planted leg. The beanplant is the same trick with the other edge - the inner, toe-side one.

Step by step

  1. Roll slowly; crouch and grab the outer, heel-side edge near the nose with the front hand.
  2. Step the front foot off and plant it beside the board.
  3. Lift the board by the nose up beside the raised knee, back foot staying on the tail area.
  4. Bring the board back down under your feet.
  5. Guide the front foot back onto the front bolts as the wheels touch.
  6. Release the grab and roll away.

Body mechanics

Front footSteps off and plants heel-side, provides the jump, then returns to the front bolts at the peak.
Back footStays planted on the deck over the back bolts, riding the lifted board.
ShouldersCrouch low into the grab, then extend tall through the spring.
ArmsBack hand holds the toe-side rail until the peak; front arm swings up for lift.
GazeAt the deck during the plant and grab, forward for the landing.

Delete this comment?

Discussion

Sign in to join the discussion.

No comments yet.

Something wrong with the Boneless?

No account needed. Say what's wrong and, if you can, what it should be - a source helps a lot. If you know exactly what the fix is, proposing the edit directly gets it in faster.

What kind of problem?